How to clean and save cut-resistant gloves

How to clean and save cut-resistant gloves

The importance of 1. cut-resistant gloves to clean cut-resistant gloves is a kind of hand equipment with protective function, which is widely used in machining, glass treatment, metal treatment and other work occasions that require hand protection. Due to prolonged exposure to various environments and substances, cut-resistant gloves are susceptible to contamination and damage, so correct cleaning and preservation methods are particularly important. Cleaning can not only extend the service life of gloves, but also maintain its protective function, while avoiding the growth of bacteria and ensuring the safety of users.

2. cleaning steps 1. Preliminary cleaning: After each use of cut-resistant gloves, preliminary cleaning should be carried out in time. First, shake off the dust and debris on the gloves, and then gently brush off the dirt on the surface with a brush.

2. Washing: For washable cut-resistant gloves, add an appropriate amount of detergent and gently scrub with a soft brush dipped in water. Care should be taken to avoid the use of corrosive or irritating cleaning agents. When cleaning, the technique should be gentle, to avoid too rough lead to damage to the gloves.

3. Drying: After washing, gently dry the water with a dry towel, and then dry. Be careful not to expose to the sun or dry at high temperature to prevent the gloves from being deformed or damaged.

4. Special stain treatment: If you encounter difficult to clean stains, such as oil, blood, etc., you can use professional cleaners to deal. When using, pay attention to follow the instructions of the cleaning agent to avoid damage to the gloves.

3. preservation method 1. storage environment: cut gloves should be stored in a dry, ventilated, dark place, avoid moisture and high temperature. Humid environment can easily lead to moldy gloves, and high temperature may make gloves deformation, aging.

2. Avoid oppression: Compression and storage of cut-resistant gloves for a long time may cause their deformation and affect their service life. Therefore, keep the gloves in their natural state when stored, avoiding folding or compression.

3. Regular inspection: regularly check the integrity of the anti-cut gloves, and replace them in time if they are damaged. At the same time, check whether the storage environment is dry and ventilated to prevent mildew.

4. Classified storage: different types of gloves should be stored separately to avoid confusion. At the same time, avoid storing cut-resistant gloves with other sharp objects to avoid puncturing the gloves.

4. note 1. when cleaning, according to the material of the gloves to choose the appropriate cleaning agent and cleaning method. Gloves of different materials have different performance characteristics, so cleaning and preservation methods will be different.

2. During the cleaning process, avoid using too rough methods to avoid damaging the gloves.

3. When using cut-resistant gloves, pay attention to comply with relevant safety regulations to avoid accidental injuries caused by using gloves in dangerous environments.

4. Cut-resistant gloves that have not been used for a long time should be inspected and maintained regularly to ensure their performance and safety.

5. If the anti-cutting gloves are found to be worn, aged, broken, etc., new gloves should be replaced in time to avoid danger.

In short, the correct cleaning and preservation methods can extend the service life of cut-resistant gloves and maintain their protective function. The user should choose the appropriate cleaning agent and cleaning method according to the material and actual situation of the gloves, and observe the relevant precautions. Only in this way can we ensure that the cut-resistant gloves maintain a good use condition while protecting the safety of the hands.